Sample Video and Project (two depth sensors)

From iPi Docs
Jump to: navigation, search

Here you can find sample videos and animations captured by two MS Kinect 2 (Kinect for XBox One) depth sensors with the aid of Distributed Recording.

Kinect2Flat.png  Kinect2Flat.png

Calibration Sequence

Sample calibration video file and appropriate iPiCalib project which is result of processing in iPi Mocap Studio:

     iPiVideoIcon-128.png   ↓ Download video file ↓
dual_kinect2_calibration_short.iPiVideo
550 MByte
    
 
iPiCalibIcon-128.png   ↓ Download calibration file ↓
dual_kinect2_calibration_short.iPiCalib
242 KByte

How to use:

  • Download and install iPi Mocap Studio.
  • Download both above files and put them all in one and the same folder on your hard drive.
  • Run iPi Mocap Studio, click Open button or press Ctrl+O and select dual_kinect2_calibration_short.iPiCalib file downloaded on the previous step.
  • Now you can "play" with resulting calibration data in iPi Mocap Studio.
  • If you want to try to process source video file by yourself then:
    • click New button or press Ctrl+N;
    • select dual_kinect2_calibration_short.iPiVideo file downloaded before;
    • choose Calibration project type;
    • switch to Calibration tab and push Calibrate Based on Light Marker button;
    • after calibration is performed, hide background using View > Hide Background menu item and turn on View > Show Depth from All Sensors item;
    • now you can visually check the quality of the resulted point cloud.


"Walking" Performance Sequence

Sample performance video file with walking movements and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

     iPiVideoIcon-128.png   ↓ Download video file ↓
dual_kinect2_walking.iPiVideo
104 MByte
    
 
iPiMotionIcon-128.png   ↓ Download project file ↓
dual_kinect2_walking.iPiMotion
371 KByte

How to use:

  • Download and install iPi Mocap Studio.
  • Download both above files and put them all in one and the same folder on your hard drive.
  • Run iPi Mocap Studio, click Open button or press Ctrl+O and select dual_kinect2_walking.iPiMotion file downloaded on the previous step.
  • Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
  • If you want to try to process source video file by yourself then:
    • click New button or press Ctrl+N;
    • select dual_kinect2_walking.iPiVideo file downloaded before;
    • choose Action project type;
    • choose the following file as scene parameters: dual_kinect2_calibration_short.iPiCalib
    • set the following parameters of actor:
      • Gender = Male
      • Height = 1.75 m
    • then you can process the video.


Exported "Walking" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

  • Default iPi Rig
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
FileExtensionDAE.png ↓ COLLADA ↓
FileExtensionSMD.png ↓ Valve Source Engine SMD ↓
FileExtensionDMX.png ↓ Valve Source Engine DMX ↓
  • Motion Builder
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
  • 3ds Max Biped
FileExtensionBVH.png ↓ BVH Animation ↓
  • Blender
FileExtensionBVH.png ↓ BVH Animation ↓
  • Source Film Maker and Valve Source Engine
FileExtensionSMD.png ↓ Droid Character in SMD Format ↓
FileExtensionDMX.png ↓ Spy Character in DMX Format ↓


"Floor Rolls" Performance Sequence

Sample performance video file with floor rolls movements and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

     iPiVideoIcon-128.png   ↓ Download video file ↓
dual_kinect2_floor_rolls.iPiVideo
438 MByte
    
 
iPiMotionIcon-128.png   ↓ Download project file ↓
dual_kinect2_floor_rolls.iPiMotion
1.26 MByte

How to use:

  • Download and install iPi Mocap Studio.
  • Download both above files and put them all in one and the same folder on your hard drive.
  • Run iPi Mocap Studio, click Open button or press Ctrl+O and select dual_kinect2_floor_rolls.iPiMotion file downloaded on the previous step.
  • Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
  • If you want to try to process source video file by yourself then:
    • click New button or press Ctrl+N;
    • select dual_kinect2_floor_rolls.iPiVideo file downloaded before;
    • choose Action project type;
    • choose the following file as scene parameters: dual_kinect2_calibration_short.iPiCalib
    • set the following parameters of actor:
      • Gender = Male
      • Height = 1.75 m
    • then you can process the video.


Exported "Floor Rolls" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

  • Default iPi Rig
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
FileExtensionDAE.png ↓ COLLADA ↓
FileExtensionSMD.png ↓ Valve Source Engine SMD ↓
FileExtensionDMX.png ↓ Valve Source Engine DMX ↓
  • Motion Builder
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
  • 3ds Max Biped
FileExtensionBVH.png ↓ BVH Animation ↓
  • Blender
FileExtensionBVH.png ↓ BVH Animation ↓
  • Source Film Maker and Valve Source Engine
FileExtensionSMD.png ↓ Droid Character in SMD Format ↓
FileExtensionDMX.png ↓ Spy Character in DMX Format ↓


"Spin Jump" Performance Sequence

Sample performance video file with spin jump movement and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

     iPiVideoIcon-128.png   ↓ Download video file ↓
dual_kinect2_spin_jump.iPiVideo
71.8 MByte
    
 
iPiMotionIcon-128.png   ↓ Download project file ↓
dual_kinect2_spin_jump.iPiMotion
324 KByte

How to use:

  • Download and install iPi Mocap Studio.
  • Download both above files and put them all in one and the same folder on your hard drive.
  • Run iPi Mocap Studio, click Open button or press Ctrl+O and select dual_kinect2_spin_jump.iPiMotion file downloaded on the previous step.
  • Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
  • If you want to try to process source video file by yourself then:
    • click New button or press Ctrl+N;
    • select dual_kinect2_spin_jump.iPiVideo file downloaded before;
    • choose Action project type;
    • choose the following file as scene parameters: dual_kinect2_calibration_short.iPiCalib
    • set the following parameters of actor:
      • Gender = Male
      • Height = 1.75 m
    • then you can process the video.


Exported "Spin Jump" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

  • Default iPi Rig
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
FileExtensionDAE.png ↓ COLLADA ↓
FileExtensionSMD.png ↓ Valve Source Engine SMD ↓
FileExtensionDMX.png ↓ Valve Source Engine DMX ↓
  • Motion Builder
FileExtensionBVH.png ↓ BVH Animation ↓
FileExtensionFBX.png ↓ FBX ↓
  • 3ds Max Biped
FileExtensionBVH.png ↓ BVH Animation ↓
  • Blender
FileExtensionBVH.png ↓ BVH Animation ↓
  • Source Film Maker and Valve Source Engine
FileExtensionSMD.png ↓ Droid Character in SMD Format ↓
FileExtensionDMX.png ↓ Spy Character in DMX Format ↓


More Samples