Sample Video and Project (two depth sensors)

Here you can find sample videos and animations captured by two MS Kinect 2 depth sensors with the aid of Distributed Recording.

  

Calibration Sequence

Sample calibration video file and appropriate iPiCalib project which is result of processing in iPi Mocap Studio:

			↓ Download video file ↓ two_kinects2_calibration.iPiVideo 339 MByte
			↓ Download calibration file ↓ two_kinects2_calibration.iPiCalib 99 KByte

How to use:

• Download and install iPi Mocap Studio.
• Download both above files and put them all in one and the same folder on your hard drive.
• Run iPi Mocap Studio, click Open button or press Ctrl+O and select two_kinects2_calibration.iPiCalib file downloaded on the previous step.
• Now you can "play" with resulting calibration data in iPi Mocap Studio.
• If you want to try to process source video file by yourself then:
  • click New button or press Ctrl+N;
  • select two_kinects2_calibration.iPiVideo file downloaded before;
  • choose Calibration project type;
  • switch to Calibration tab and push Calibrate Based on Light Marker button;
  • after calibration is performed, hide background using View > Hide Background menu item and turn on View > Show Depth from All Sensors item;
  • now you can visually check the quality of the resulted point cloud.

"Walk" Performance Sequence

Sample performance video file with walking movements and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

			↓ Download video file ↓ two_kinects2_walk.iPiVideo 122 MByte
			↓ Download project file ↓ two_kinects2_walk.iPiMotion 450 KByte

How to use:

• Download and install iPi Mocap Studio.
• Download both above files and put them all in one and the same folder on your hard drive.
• Run iPi Mocap Studio, click Open button or press Ctrl+O and select two_kinects2_walk.iPiMotion file downloaded on the previous step.
• Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
• If you want to try to process source video file by yourself then:
  • click New button or press Ctrl+N;
  • select two_kinects2_walk.iPiVideo file downloaded before;
  • choose Action project type;
  • choose the following file as scene parameters: two_kinects2_calibration.iPiCalib
  • set the following parameters of actor:
    • Gender = Male
    • Height = 1.75 m
  • then you can process the video.

Exported "Walk" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

• Default iPi Rig

↓ BVH Animation ↓

↓ FBX ↓

↓ COLLADA ↓

↓ Valve Source Engine SMD ↓

↓ Valve Source Engine DMX ↓

• Motion Builder

↓ BVH Animation ↓

↓ FBX ↓

• 3ds Max Biped

↓ BVH Animation ↓

• Blender

↓ BVH Animation ↓

• Source Film Maker and Valve Source Engine

↓ Engineer Character in SMD Format ↓

↓ Spy Character in DMX Format ↓

"Side Running" Performance Sequence

Sample performance video file with side-running movements and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

			↓ Download video file ↓ two_kinects2_side_running.iPiVideo 203 MByte
			↓ Download project file ↓ two_kinects2_side_running.iPiMotion 695 KByte

How to use:

• Download and install iPi Mocap Studio.
• Download both above files and put them all in one and the same folder on your hard drive.
• Run iPi Mocap Studio, click Open button or press Ctrl+O and select two_kinects2_side_running.iPiMotion file downloaded on the previous step.
• Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
• If you want to try to process source video file by yourself then:
  • click New button or press Ctrl+N;
  • select two_kinects2_side_running.iPiVideo file downloaded before;
  • choose Action project type;
  • choose the following file as scene parameters: two_kinects2_calibration.iPiCalib
  • set the following parameters of actor:
    • Gender = Male
    • Height = 1.75 m
  • then you can process the video.

Exported "Side Running" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

• Default iPi Rig

↓ BVH Animation ↓

↓ FBX ↓

↓ COLLADA ↓

↓ Valve Source Engine SMD ↓

↓ Valve Source Engine DMX ↓

• Motion Builder

↓ BVH Animation ↓

↓ FBX ↓

• 3ds Max Biped

↓ BVH Animation ↓

• Blender

↓ BVH Animation ↓

• Source Film Maker and Valve Source Engine

↓ Engineer Character in SMD Format ↓

↓ Spy Character in DMX Format ↓

"Complex" Performance Sequence

Sample performance video file with different rather complex movements and appropriate iPiMotion project which is result of processing in iPi Mocap Studio:

			↓ Download video file ↓ two_kinects2_complex.iPiVideo 702 MByte
			↓ Download project file ↓ two_kinects2_complex.iPiMotion 3.6 MByte

How to use:

• Download and install iPi Mocap Studio.
• Download both above files and put them all in one and the same folder on your hard drive.
• Run iPi Mocap Studio, click Open button or press Ctrl+O and select two_kinects2_complex.iPiMotion file downloaded on the previous step.
• Now you can "play" with resulting animation in iPi Mocap Studio, import your target character and export resulting animation based on the following instructions.
• If you want to try to process source video file by yourself then:
  • click New button or press Ctrl+N;
  • select two_kinects2_complex.iPiVideo file downloaded before;
  • choose Action project type;
  • choose the following file as scene parameters: two_kinects2_calibration.iPiCalib
  • set the following parameters of actor:
    • Gender = Male
    • Height = 1.75 m
  • then you can process the video.

Exported "Complex" Animation

You can export animation from sample project using free trial version of iPi Mocap Studio: see Animation Export article.

If you don't want to install and run iPi Mocap Studio, below you can find sample animation files for different rigs and in different formats. All these files are produced by iPi Mocap Studio from this sample project.

• Default iPi Rig

↓ BVH Animation ↓

↓ FBX ↓

↓ COLLADA ↓

↓ Valve Source Engine SMD ↓

↓ Valve Source Engine DMX ↓

• Motion Builder

↓ BVH Animation ↓

↓ FBX ↓

• 3ds Max Biped

↓ BVH Animation ↓

• Blender

↓ BVH Animation ↓

• Source Film Maker and Valve Source Engine

↓ Engineer Character in SMD Format ↓

↓ Spy Character in DMX Format ↓

More Samples

Sample videos and animations captured by two ASUS Xtion Live sensors can be found on the following page: Sample Video and Project (two ASUS Xtions).